Thursday, September 26, 2013
Browse »
home»
Canon
»
code
»
f30
»
f60
»
f80
»
multipass
»
reset
»
tank
»
waste
»
Canon Multipass F30 F60 F80 waste tank reset code
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.....By pressing Menu THEN Copy THEN #.
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key. (On F30 printers, skip step (6) since there is no [OK] key .)
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Canon Multipass F30 F60 F80 waste tank reset code
1) Enter SERVICE MODE.....By pressing Menu THEN Copy THEN #.
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key. (On F30 printers, skip step (6) since there is no [OK] key .)
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.