guide reset

Browse » home» 41 » Canon » for » tips » unnrecognized » Tips for unnrecognized Canon 41

---

Tips for unnrecognized Canon 41

This tips also used for printhead 40 / 41 that unknown to by system ip1200, 1300, 1600, 1700, 2200 before buying new printhead.
Before buying printhead 41 has just, tries doing this thing :

1. Discharges connection between printer with PC
2. Turn on printer.
3. Opened covers then waiting until printhead position of printhead replacement ( peripatetic printhead toward left)
4. Remove catridge ( PG40 / 41) from printhead carriage.
After printhead is released , unplug cable power ( dont turn off printer from button power)
5. Cleans contact ( spicular of small needle) the in printhead carriage with alcohol 98%.
6. Cleans contact point ( copper line modeling small box box at printhead is relating to printhead carriage)printhead with alcohol 98%.
7. Plug printhead at printhead carriage.
8. Closed cover printer.
9. Push power button 1 times and resume button 1 times.
10. Push power button ( dont released) then attached cable power. After cable power is attached just release power button. Push power button 1 times again if lamp power had not blazed.
11. Lets printer to do insitialisation.
12. I hope errors lamp doesnt blaze / glisten.

If errors lamp doesnt blaze / glisten, you don’t necessarily buy brand new Canon 41 but if glisten errors lamp, you can do point No 4 ~ 11 max 3 times. If still errors still also, yeah you must buy brand new Canon 41 catridge.
Hopefully can assist.
(Adapt from Reired EE-Martono)