Guide Printer Reset

With the Printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)While holding the Power button, release theresume/Cancel button. (DO NOT release the Power button.) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s) setting). Time(s) LED indication Function Remarks 0 times Green (Power) Power off When the print head is not installed, the carriage returns and locks in the home position capped. Time Orange (Alarm) Service test print . Times Green (Power) EEPRsaya information print Times Orange (Alarm) EEPRsa...

The reset method work for canon printers that using PG-40 and CL-41 cartridges. After doing this reset method your printer will not display low ink notification anymore and will not show error code “E4″ or “E5″. This method takes from indoreset yahoo group and prepared by Choy. Here how, the method to reset ink level notification: Push “resume” for 5 seconds for canon IPXXXX. For canon MPXXX you must enter to service mode. Push Power switch then remove power cord. Insert plug power cord while pressing “power switch” at the same time. Push Start/reset by step 2 continue Wait display shown “0″ Push + change display from “0″ to “1″ Push color button 2 times Push Power switch again , Printer will print 1 page Open cover Unplug power cord Take out ink cartridge #40 and #41 Insert plug again Push power switch Open cover (scan cover) Insert ink cartridge #40 and #41 again Enter to service mode for canon MPXXX With the printer powered off but connected to a power source, press the Power ...

This is How to Reset Canon Pixma iP 1880 : Waste Ink Counter Reset Manual for Service mode 1. Turn On iP1880 2. Push and Hold Resume button about 2 minutes 3. Release Resume button 4. Printer back to normal again download here