Friday, March 29, 2013

Dell Inspiron 1300 service guide

Dell Inspiron 1300 service guide manual is a maintenance troubleshooting and instruction owner manual
reference used for maintaining, disassembly, removal, replacement,
install and servicing the Dell Inspiron 1300. It provides comprehensive
information on identifyin features, components, and spare parts
troubleshooting problems and performing assembly and disassembly
procedures. Table contents of Dell Inspiron 1300 service manual Before
You Begin

Hinge System Components Battery Memory, Optical Drive, and
Mini PCI Card Hard Drive Keyboard Display Assembly Palm Rest Modem
Coin-Cell Battery Microprocessor Thermal-Cooling Assembly
Microprocessor Module Speakers System Board Antenna Fan Flashing
the BIOS Base Plastics Pinout Assignments for I/O Connectors. Download
Dell Inspiron 1300 Service Manual here
Continue Reading[..]

Wednesday, March 27, 2013

Dell Inspiron 2650 Service Manual

Dell Inspiron 2650 service guide repair manual is a maintenance
troubleshooting and instruction owner manual reference used for
maintaining, disassembly, removal, replacement, install and servicing
the Dell Inspiron 2650. It provides comprehensive information on
identifyin features, components, and spare parts troubleshooting
problems and performing assembly and disassembly procedures.

Table
contents of Dell Inspiron 2650 service manual A Tour of Your Computer
Solving Problems Reinstalling Drivers and Utilities Reinstalling
Microsoft® Windows® Operating Systems System Setup Program Power
Management Using the Dell Diagnostics Specifications Pin Assignments for
I/O Connectors Removing and Replacing Parts Documentation. Download
Dell Inspiron 2650 Service Manual here
Continue Reading[..]

Monday, March 25, 2013

HP Laserjet P1000 User Guide Owners Manual

This HP Laserjet P1000 User Guide Owners Manual contains the information you need when installing, setup, setting, configuring, maintenance and troubleshooting, operating instructions the HP Laserjet P1000.

Table of contents HP Laserjet P1000 Manual
  • Product information
    Product configurations ~ Product features ~ Identify product parts
  • Control panel
  • Product software
    Supported operating systems ~ Supported network systems (HP LaserJet P1500 network models only) ~ Device connections ~ Software for Windows ~ Software for Macintosh
  • Supported paper and other media
    Understand media use ~ Supported media sizes ~ Select print media ~ Special media for printing
  • Print tasks
    Print-quality settings ~ Load media ~ Print on special media ~ Canceling a print job
  • Managing and maintenance
    Replace the print cartridge ~ Printer information pages ~ Embedded Web server ~ Manage supplies ~ Clean the device ~ Change the pickup roller ~ Clean the pickup roller ~ Change the printer separation pad ~ EconoMode
  • Problem solving
    Problem-solving checklist ~ Status-light patterns ~ Clearing jams ~ Improve print quality ~ Media problem-solving ~ Printed page is different from what appeared on screen ~ Printer software problems ~ Common Macintosh problems ~ Network-setup problem-solving
download HP Laserjet P1000 user manua
Continue Reading[..]

Lexmark Prestige Pro805 User Guide

This Lexmark Prestige Pro805 User Guide Owners Manual contains the information you need when installing, setup, setting, configuring, maintenance and troubleshooting, operating instructions the Lexmark Prestige Pro805.

Table of contents Lexmark Prestige Pro805 Manual
  • Safety information
  • About your printer
    Thank you for choosing this printer! ~ Minimizing your printers environmental impact ~ Finding information about the printer ~ Understanding the parts of the printer
  • Ordering and replacing supplies
    Ordering ink cartridges ~ Using genuine Lexmark ink cartridges ~ Replacing ink cartridges ~ Ordering paper and other supplies ~ Recycling Lexmark products
  • Using the printer control panel buttons and menus
    Using the printer control panel ~ Understanding the home screen ~ Navigating menus using the touch screen ~ Changing the Power Saver timeout ~ Saving paper and energy with Eco-Mode ~ Resetting to factory settings
  • Using the printer software
    Minimum system requirements ~ Using the Windows printer software ~ Using the Macintosh printer software ~ Finding and installing optional software ~ Updating the printer software (Windows only) ~ Reinstalling the printer software
  • Loading paper and original documents
    Loading the paper tray ~ Loading envelopes or photo paper ~ Loading various paper types ~ Saving paper default settings ~ Loading original documents on the scanner glass ~ Loading original documents into the ADF
  • Printing
    Tips for printing ~ Printing basic documents ~ Printing specialty documents ~ Working with photos ~ Printing from a Bluetooth-enabled device ~ Printing on both sides of the paper (duplexing) ~ Managing print jobs
  • Copying
    Tips for copying ~ Making copies ~ Copying photos ~ Copying an ID card ~ Copying a two-sided document ~ Enlarging or reducing images ~ Adjusting copy quality ~ Making a copy lighter or darker ~ Collating copies using the printer control panel ~ Repeating an image on one page ~ Copying multiple pages on one sheet ~ Making a duplex copy ~ Canceling copy jobs
  • Scanning
    Tips for scanning ~ Scanning to a local or network computer ~ Scanning to a flash drive or memory card ~ Scanning photos into an editing application ~ Scanning documents into an editing application ~ Scanning directly to e-mail using the printer software ~ Scanning to a PDF ~ Scanning FAQ ~ Canceling scan jobs
  • E-mailing
    Setting up the printer to e-mail ~ Creating an e-mail contact list ~ Sending e-mail ~ Canceling an e-mail
  • Networking
    Installing the printer on a wireless network ~ Advanced wireless setup ~ Installing the printer on an Ethernet network ~ Networking FAQ
  • Using SmartSolutions
    What is SmartSolutions? ~ Creating and customizing printer solutions
  • Maintaining the printer
    Maintaining ink cartridges ~ Cleaning the exterior of the printer ~ Cleaning the scanner glass ~ Cleaning the touch screen
  • Troubleshooting
    Before you troubleshoot ~ Using the Service Center to solve printer problems ~ If Troubleshooting does not solve your problem ~ Setup troubleshooting ~ Jams and misfeeds troubleshooting ~ Print troubleshooting ~ Copy and scan troubleshooting ~ E-mail troubleshooting ~ Memory card troubleshooting ~ Network troubleshooting
download Lexmark Prestige Pro805 user manual
Continue Reading[..]

Sunday, March 24, 2013

Canon Pixma MX350 User Manual

This Canon Pixma MX350 User Guide Owners Manual contains the information you need when installing, setup, setting, configuring, maintenance and troubleshooting, operating instructions the SCanon Pixma MX350. This user’s guide also contains the Software Section providing you with step-by-step instructions for using your Canon Pixma MX350, and how to use the supplied software utilities.

Table of contents Canon Pixma MX350 Manual
  • Check the Included Items
  • Remove the Protective Material
  • Connect the Telephone Line
  • Turn the Power On
  • Install the FINE Cartridges
  • Load Paper
  • Set Up for Fax Reception
  • Select Connection Method
  • Install the Software (USB Connection)
  • Wireless Setup
  • Wired Setup
  • Install the Software (Network Connection)
  • Use from Additional Computers
  • Try Using the Machine
  • Maintenance
  • Specifications get
Continue Reading[..]

Saturday, March 23, 2013

Epson L350 Driver Download

Driver Download for Epson L350 INK TANK SYSTEM PRINTER
Epson L350

Compatibility and System Requirements :
- Windows 8- Windows 7- Windows 7 (x64)- Windows Vista- Windows Vista (x64)- Windows XP
Epson L350 Driver
Source direct
Continue Reading[..]

Printer Canon LBP5360 download

Canon PCL5e/5c v8.70 Printer Driver
Compatibility:
Operating system(s):

Windows 2003, Windows 2008, Windows 7, Windows Vista, Windows XP
Download 
Download
Continue Reading[..]

Friday, March 22, 2013

getting Communication error # 0404 fax connects

you may need to connect an ADSL filter between the wall jack and your fax machine.




If you have static on your phone line you may need to turn error correction off on the machine:



Follow these steps to turn off the V.34 and ECM setting:


Press the Home button.
Press left to select Setup.
Press OK.
Press left to select Fax Settings, then press OK.
Press up or down to select Communication, then press OK.
Select ECM, then set it to Off.
Select V.34, then set it to Off.


Try sending/receiving a fax now.
Continue Reading[..]

Thursday, March 21, 2013

EPSON STYLUS C82


This service manual contains information for the EPSON Stylus C82 and this manual contains information necessary to test, calibrate and service.

Table of contents EPSON Stylus C82 Printer Service And Repair Manual

  • Product Description
  • Operating Principles
  • Troubleshooting
  • Disassembly & Assembly
  • Adjustment
  • Maintenance & Setup
EPSON Stylus C82 Printer Service And Repair Manual
Continue Reading[..]

Wednesday, March 20, 2013

Epson Nozzle Clogs

Cleaning kit usage:

Guidelines for most epson printers :

But I think it is due to the following work method :

BIGGEST REMARKS :
-BE PATIENT !!!
-DO NOT LET AIR GET INTO THE INKTUBES OF YOUR PRINTER !!!
(this is why you need to prepare the syringe)

Phase 1 : Syringe preparation
1.Fill up the syringe COMPLETELY with the cleaning solution
2.Putt the little tube on the syringe
3.Push the fluid gently till it drops out the tube. (so that no air gets into the ink tube of the printer).

Phase 2 : Printer preparation
1.Make sure you have full ORIGINAL epson ink cartridges for your printer at your disposal.
2.Disconnect the printer from the pc
3.Connect your printer to the power cable.
4.Push the power button on the printer ,and once the inktray starts moving to the cleaning cycle remove the power cable.
5.Now you can move the inktray by hand. Move it to the position which enables you to open it.
6.Open the inktray ,remove the color of the cartridge you whish to clean.Then close it.
7.Now move the inktray gently to the right (not completely) until you have space to put a small paper towel underneath.The put the paper towel underneath. Then slide it back to the left so its above the paper towel.
8.Now put connect the syringe (with the little tube) on the inktube.
9.Gently push the cleaning fluid into the the inktube. (the complete 1.0 ml)
10.Fill up the syringe again ,and repeat step 8,9 .
11.IMPORTANT : Dont remove the syringe ,let on the ink tube.
12.Wait for 2h

Phase 3 : Finishing
1.Remove the syringe (and the small tube).
2.Put the inkcartridge back and close the inktray.
3.Slide the inktray to the right and remove the paper towel.
4.Connect the power to the printer.
5.Connect the printer to the pc and start the printer
6.From the printdriversettings ,run the cleaning of your heads 3 times.
7.Now print at least 15 testpages.

If after phase 1,2 and 3 your printer is still not working correctly , -test page not ok- then just repeat phase 1,2 and 3 again.

In order to avoid such problems ,just print at least 1 test page every week. I had my first epson inkjet printer for 6 years and no problems.
So whoever is using an epson printer :
-use original epson ink
-print at least 1 test page a week
-NEVER let the printer without a cartridge inserted (full or empty)
Continue Reading[..]

Stylus Photo RX650

this step to use Resetter Printer Epson RX650
  1. Switch on printer
  2. Set the pc date setting to 13 february 2007
  3. Run adjprog.exe from the extracted folder
  4. Click accept
  5. Click particular adjustment mode
  6. Go to maintenance then Select waste ink pad counter then click ok
  7. Click on "check button till its done then click on initialization button then click on finish button
  8. Switch off printer for 5 secs then switch on again
  9. After you reset succesfully, you can change the date back to normal
Download Resetter Epson RX650
Continue Reading[..]

Reset Canon Pixma iP 1880


This is How to Reset Canon Pixma iP 1880 :
Waste Ink Counter Reset Manual for Service mode
1. Turn On iP1880
2. Push and Hold Resume button about 2 minutes
3. Release Resume button
4. Printer back to normal again

download here 
Continue Reading[..]

Adjustment Program Epson R230



Dear All this is resetter for fix the error or adjusment program r230  download 
kaga perlu ngisi lagi langsung jalan.

=> adjusment program Epson R220 - R230

=> adjusment program Epson R270

 
get SSC 4.2 n tutorial 
Please to be Patient and if any one want something else please give me comment down here Ok
thanks guys 4 all comment


Continue Reading[..]

Tuesday, March 19, 2013

Epson Stylus C58 Color Inkjet Printer



Epson Stylus C58 Inkjet Printer Features

* On-demand Color Inkjet Printer
* Print speed
Black: 22 ppm (economy)
Color: 12 ppm (economy)
Photo: 85 seconds ( 4×6 / 10×5 - borderless)
* Max resolution (b&w) 5760 x 1440 dpi (with Variable-Sized Droplet Technology)
* Max resolution (color) 5760 x 1440 dpi (with Variable-Sized Droplet Technology)
* Paper Feed Method - Friction feed
* Paper Input capacity - 80 sheets, A4 Plain paper
* Max document size (print) - A4, A5, A6, B5, letter, half letter, legal, 4R, 5R, envelope, 132 x 220mm
* Black ink cartridge - Approx. 170 pages
* Color ink cartridge - Approx. 255 pages
* Interface - USB v2.0
* Input Data Buffer - 32 KB
* Compatible - Windows 98SE / ME / 2000 /XP/ XP, Mac OS 10.2+
* Dimensions - 435 (L) x 219 (D) x 165 mm (H)
* Weight - 2.8 kgs

C58 printer Blnking, would need Software Reset Blinking Printer EPSON Stylus C58 ... please downlod free. hopefully useful.

Download resetter Epson C58
Continue Reading[..]

SSC Service Utility versions 4 10

- support for PM-970C
- support for PictureMate
- support for RX700
- support for R2400
- support for PM-A700
- support for PM-G720
- support for RX520
- support for CX7800
- support for CX4100
- support for DX3800
- support for CX3800/CX3810
- support for CX3700
- support for C67/68 and Photo Editions
- support for C87/C88/D88 and Photo Editions
- support for R220/R230
- support for R320
- support for CX4500
- support for CX3650
- various bug fixes
Continue Reading[..]

EPSON C67 Reset Software

actually i,m also using c67, c45 and c87 epson printer with CISS or continuous ink supply system but unfortunately this practice waste me a lot of ink just by doing printhead clean-up.

this technology is not really worth buying for.

this because if can can just figure out how this printer feed ink by original cartridges you can see easily the problem brought by this CISS.

Basically the main problem is the pressure difference between the tank and the ink delivery cartridges with the built-in auto reset chips, this, even just simple pressure calculations you can actually derive a negative pressure pulling the ink towards the tank,
every after printing (if you can notice) you have to do the routine head clean-up and therefore wasting a lot of ink. base from experience it would be much better if you just refill the original cartridge and transfer the auto reset chips to the genuine cartridges.

so by doing this you can save the life of your printerhead, ink pad etc. also the original cartridge contain a sponge which also aid in filtering the refilled ink unlike the ciss cartridge that has none.

Free Download

Continue Reading[..]

Monday, March 18, 2013

Reset Epson Stylus C90



Resetter Adjustment Prgogram Epson Stylus C90



This for Epson printer. Reset your waste ink pad counter. If any question you can ask to me how to run Adjustment Program. Thank you. and Happy RESET!!
Note : tell your friend about my site. Maybe your friends is very needed.
Download Link
stylus photo C92 Version Singapore download
Continue Reading[..]

Resetter Code for Canon S450 Printer



1. Power off printer
2. Hold Resume button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice
5. Release Power button
6. When the indicator lights steady, press RESUME 3 times. The indicator should be orange.
7. Press Power to set data

The Secret Resetter Code for Canon BJC-2000 BJC-2100 Serie

1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
4. Hold down the RESUME/RESET button and plug in the AC power cord
5. Release RESUME/RESET after plugging in the AC Power cord.
6. Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET.
7. Press and HOLD RESUME/RESET for two seconds or more and release it.
8. Press and HOLD RESUME/RESET for two seconds or more and release it.
9. Unplug AC Power Cord to set data.
Continue Reading[..]

InkRepublic R260 R280 R380 RX580 RX595 RX680

Continue Reading[..]

Sunday, March 10, 2013

Unable to clean error 46 dcp-340cw

This means a mechanical problem or a foreign object in the machine:
Open the scanner cover and remove

any foreign obstacles inside the machine. If the error message continues, disconnect the machine

from the power source for several minutes then reconnect it.

more solution can be foud at here
Continue Reading[..]

How to Reuse Ink Catridge

Printer ink is one of the most expensive things that you'll run into when you set up your home or office. If you have any picture or photos and you want to print a few and then suddenly the print cartridge runs out of ink. Do not worry, you can reuse your cartridge with ink refill.

Note the steps below:

 1. Purchase an ink refill kit at an office supply store or you can find these kits at online retailers.  
 2. Gather your kit, a roll of paper towels, and some clear scotch tape together on a large flat working
      surface, a table or desk.
  3. Remove the empty cartridge from your printer. (Remember to close your printer lid or door while you
      are working.)
  4. Cover your hands with a pair of disposable plastic gloves while you work with the messy ink.
  6. Take a paper towel and fold it in half twice. Work over the paper towel to catch any leaking ink.
  7. Place the empty cartridge on it.
  8. Read the instruction manual included with the refill kit to learn how to refill your particular type of
      cartridge. (The following instructions are just a general guide).
  9. Locate the fill holes on the top of the cartridge.  The depressions can be felt by rubbing your finger
      across the label. Some cartridges have more than one hole, but only one leads to the ink reservoir that
      you will refill. This hole will have a sponge in it.
 10.Use a sharp pencil to pierce the refill holes in the top of the ink cartridge Or you can take the top label
      off with a knife or screwdriver (Correct places can also be found in the kit instructions).
 11.In addition to black, there are three colors of ink: magenta, cyan, and yellow. Follow the kit instructions
      on which hole to insert each color OR push a toothpick into the holes to identify the colors as markings
      on the printer cartridge are sometimes there to fool you into putting the wrong colors into the cartridge
      ink chambers.
 12.Insert the long needle of the refill ink bottle deeply into the correct hole penetrating the foam down into
      the bottom of the cartridge. It is important not to push air into the cartridge foam while refilling.  (An air
      pocket will keep the ink from reaching the print head causing the cartridge not to print.)
 13.Slowly, add the ink. Carefully watch to be sure that you do not over-fill.
 14.Stop quickly as soon as you see a bit of ink oozing out of the hole. Without letting go of the bottle,
      slowly release the air, sucking a little ink back out of the ink cartridge, before you remove the needle
      completely.
 15.Carefully daub the cartridge contacts on the paper towel, you should see a splotch of the ink leaking out
      onto the paper towel.
 16.Cover the hole with a small piece of clear scotch tape. (This works better than the seal dots included in
      the kit.) Make sure that no ink is leaking out of the top holes. (That's where the clear tape comes in
      handy.) Be careful not to cross contaminate the colors.
 17.Repeat steps 11-15 for each ink color.
 18.After you have refilled all three colors, carefully blot (don't wipe or rub) the cartridge printhead on a
      folded piece of paper towel.  You may need to do this several times. Do this until it stops bleeding and
      you see an even stripe of three colors showing up on the towel.
 19 If the blot shows the colors either faded or not at all, blot on wet paper towel and again on dry, to get
      the ink flowing.
 20.Replace the ink cartridge into the printer.  Never, ever install a leaking print cartridge.
 21.Immediately print something, anything, just to get the ink flowing.  Print several test pages, preferable
      photos with a lot of different colors.
 22.Follow the cleaning or priming cycles for your specific printer.

If you follow this how-to guide and refill your print cartridge instead of buying a new one, you can save literally hundreds of dollars in printer ink. After refilling a print cartridge 5 or 6 times, the print head will eventually wear out. It can't last forever. Then you'll just have to buy a new cartridge and replace it.
Continue Reading[..]

Saturday, March 9, 2013

Resetter Epson R390

Here is a step to Reset waste ink counter on Epson  R390

  • Extrac Adjustment Program files youve downloaded
  • Turn the printer
  • Then click RUN AdjProg.exe. for Epson Stylus R390 from the extracted folder
  • Choose Choose a special mode of adjustment
  • Go to interview Then select waste Ink pad counter then click ok
  • Initialization click the button to remove the Waste Ink Pad counter to zero
  • Once you press the Initialize button, you can see the message is complete, so press the OK button
  • To Read Status Press Cons Read, you can see the current counter value.
  • Turn off the printer then turn it on again 5 seconds
  • After you successfully reset, you can also change the date settings back to normal again
Download : Resetter Epson R390
    Continue Reading[..]

    Resetter Epson C90


    Here is a step to Reset waste ink counter on Epson C90

    • Extrac Adjustment Program files youve downloaded
    • Turn the printer
    • Then click RUN AdjProg.exe. for Epson Stylus C90 from the extracted folder
    • Choose Choose a special mode of adjustment
    • Go to interview Then select waste Ink pad counter then click ok
    •  Initialization click the button to remove the Waste Ink Pad counter to zero
    • Once you press the Initialize button, you can see the message is complete, so press the OK button
    • To Read Status Press Cons Read, you can see the current counter value.
    •  Turn off the printer then turn it on again 5 seconds
    • After you successfully reset, you can also change the date settings back to normal again
    Download Resetter Epson C90
    $ : Clik
    Continue Reading[..]

    Thursday, March 7, 2013

    Canon Error B200, How To Vanquish


    The Canon error code B200 certainly
    ranks as one of the more common issues and certainly one of the most the
    bedeviling error codes a Canon user will come across. First, let's look
    at the root of the error message so we may bring to light the variety
    of possible solutions.


    If you have read other portions
    of this website, you may already know of the fork in the road in
    inkjet-based printing. One path is the HP-based Pizeo-electric crystal
    approach. A Pizeo-crystal vibrates when electricity is applied to it.
    This creates a push and pull of the ink to the media. Contrast this to
    the Canon bubble jet system.


    Imagine if you will on an ultra-fine
    scale, the rubber nipple on a baby bottle. If you have ever overheated a
    baby's bottle, you have already experienced the baby's forthcoming meal
    shooting out the top of the nipple like some miniature Mount Vesuvius.
    While the thermodynamic law in a baby bottles application is messy and
    annoying, Canon engineers use the principle for printing.
     In
    comparison to HP ink, the ink supply for a Canon printer is much thicker
    and more like oil, almost tar like. Behind the nipple is an electrical
    resistor that produces heat. Therefore, the same thermodynamic laws
    apply, and a droplet of ink 'bubbles out' of the nozzle.
    The resistor
    needs electricity from a high-voltage section and feedback from the
    printhead about what is going on in the active bubble land. When
    something has gone awry in this sub process, the service error B200
    error occurs.
    Service Code B200 Troubleshooting
    Replace ink cartridges if they are empty
    At
    the risk of stating the obvious (frequently not so obvious in the heat
    of the moment), find out if the ink cartridges are empty. When in doubt,
    try a new cartridge.
    A data cable of print head is open
    Did you just replace an ink cartridge? Perhaps you shifted a data cable to the print head.
    Bad power adapter
    Is
    the power supply (internal or external) failing to generate enough
    electrical juice to get the resistors hot enough for the laws of
    thermodynamics to occur (creating a bubble of ink).
    Replace printhead if it is damaged or not a part of the ink cartridge
    It
    should be noted that for the Canon printers that use a separate (not
    integrated) printhead, there is a finite lifespan to the dozens of
    microsizedbaby bottle nipples. Just like the kids bottle, the
    rubber/silicon nozzle does wear out.
    Turn off the printer for some time
    In other troubleshooting tips here we have advised any inkjet printer not seeing regular usage to run a
    test print page. For those of you making heavy usage of a Canon inkjet
    printer, consider getting a coffee break, while giving your printer a
    break too. This will avoid saturating the printhead with heat,
    prolonging useful service life.
    Update the printer driver
    If
    you have followed all this and you're still screaming, "no joy!” From
    the printer menu (not computer) push the buttons to get a demo or test
    page. If everything is hunky-dory when you do this, however, you get the
    service error code B200 when you try to produce something productive,
    odds are good, the print driver the computer is using has gone south
    (corrupt).
     When printing on a network, a corrupt printer driver can
    spread like an unwanted virus. Depending on the network, a driver that
    has gone rogue may be seen as an updated driver, which network will
    'helpfully spread' as an update.
    Continue Reading[..]

    Check the ink levels HP Photosmart C4480

    To check the ink levels from the HP Photosmart Software

    • 1. In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox.

      NOTE:
      You can also open the Printer Toolbox from the Print
      Properties dialog box. In the Print Properties dialog box, click the
      Features tab, and then click the Printer Services button.


      The Printer Toolbox appears.
    • 2. Click the Estimated Ink Level tab. The estimated ink levels for the print cartridges appear.

    Print a self-test report HP Photosmart C4480


    If you are experiencing problems with printing, print a self-test
    report before you replace the print cartridges. This report provides
    useful information on several aspects of your printert, including your
    print cartridges.

    To print a self-test report


    • 1. Load letter or A4 unused plain white paper into the input tray.
    • 2. Press and hold the Cancel button and then press the Start Copy Color button.

      The HP Photosmart C4480 printers prints a self-test report, which might
      indicate the source of the printing problem. A sample of the ink test
      area of the report is shown below.

      hp c4400 self test
    • 3. Make sure the test patterns show a complete grid and the thick color lines are complete.
      1. If more than a few lines in a pattern are broken, this might
        indicate a problem with the nozzles. You might need to clean the print
        cartridges.
      2. If the black line is missing, faded, streaked, or shows lines, this
        might indicate a problem with the black or photo print cartridge in the
        right slot.
      3. If any of the color lines are missing, faded, streaked, or show lines, this might
      4. indicate a problem with the tri-color print cartridge in the left slot.


    Clean the print cartridges HP Photosmart C4480 printers


    Use this feature when the self-test report shows streaking, white
    lines through any of the lines of color or when a color is muddy after
    installing a print cartridge for the first time.

    Do not clean print cartridges unnecessarily, as this wastes ink and shortens the life of the ink nozzles.

    To clean the print cartridges from the HP Photosmart Software


    • 1. Load letter, A4, or legal unused plain white paper into the input tray.
    • 2. In the HP Solution Center, click Settings.
    • 3. In the Print Settings area, click Printer Toolbox.

      NOTE: You can also
      open the Printer Toolbox from the Print Properties dialog box. In the
      Print Properties dialog box, click the Features tab, and then click
      Printer Services.

      The Printer Toolbox appears.
    • 4. Click the Device Services tab.
    • 5. Click Clean the Print Cartridges.
    • 6. Follow the prompts until you are satisfied with the quality of the output, and then click Done.
    • 7. Follow the prompts until you are satisfied with the quality of the output, and then click Done.

    There are three stages of cleaning. Each stage lasts from one to two
    minutes, uses one sheet of paper, and uses an increasing amount of ink.
    After each stage, review the quality of the printed page. You should
    only initiate the next phase of cleaning if the print quality is poor.

    If print quality still seems poor after you clean the print cartridges,
    try cleaning the print cartridge contacts before replacing the affected
    print cartridge.


    Replace the print cartridges HP Photosmart C4480 printers


    When the ink level for the print cartridge is low, a message appears
    on the display. You can also check the ink levels by using the Printer
    Toolbox available through the HP Photosmart Software on your computer or
    through the Print Properties dialog box on your computer.


    To replace the print cartridges HP Photosmart C4480 printers


    • 1. Make sure the HP Photosmart C4480 printers is turned on.

    CAUTION: If the
    product is turned off when you open the print cartridge door to access
    the print cartridges, it will not release the cartridges for changing.
    You might damage the product if the print cartridges are not docked
    safely when you try to remove them.


    • 2. Make sure you have letter or A4 unused plain white paper loaded in the input tray.

    • 3. Open the print cartridge door.

      Replace the print cartridges

    The print carriage moves to the far right side of the printer.


    • 4. Wait until the print carriage is idle and silent. Lightly press
      down on a print cartridge to release it, and then pull the print
      cartridge toward you out of its slot.

    If you are replacing the tri-color print cartridge, remove the print cartridge from the slot on the left.


    If you are replacing the black or photo print cartridge, remove the print cartridge from the slot on the right.

    Replace-the-print-cartridge













    1Print cartridge slot for the tri-color print cartridge
    2Print cartridge slot for the black and photo print cartridges

    TIP: If you are removing the black print cartridge
    in order to install the photo print cartridge, store the black print
    cartridge in the print cartridge protector or an airtight plastic
    container.


    • 5. Remove the new print cartridge from its packaging and, being
      careful to touch only the black plastic, gently remove the plastic tape
      by using the pink pull tab.

      HP Photosmart C4480 printers
















    1Copper-colored contacts
    2Plastic tape with pink pull tab (must be removed before installing)
    3Ink nozzles under tape

    CAUTION: Do not touch the copper-colored contacts or
    ink nozzles. Also, do not re-tape the print cartridges. Doing so can
    result in clogs, ink failure, and bad electrical connections.


    • 6. Hold the print cartridge with the HP logo on top, and insert the
      new print cartridge into the empty cartridge slot. Make sure you push
      the print cartridge in firmly until it snaps into place.

      HP-Photosmart-C4480-printer

    If you are installing the tri-color print cartridge, slide it into the left slot.

    If you are installing a black or photo print cartridge, slide it into the right slot.


    • 7. Close the print cartridge door.

    • 8. When prompted, press OK.

    The HP Photosmart C4480 printers prints a print cartridge alignment page.

    NOTE: If you have
    colored paper loaded in the input tray when you align the print
    cartridges, the alignment will fail. Load unused plain white paper into
    the input tray, and then try the alignment again.


    • 9. Load the page print side down on the right front corner of the glass, and then press OK to scan the page.

    • 10. When the On button stops flashing, the alignment is complete. Remove the alignment page and recycle or discard it.

    Via:feedfury.com

    Continue Reading[..]

    Wednesday, March 6, 2013

    HP LaserJet 3300mfp Manual

    The HP LaserJet 3300mfp series is designed to Print
    documents easily with the laser-quality you have come to expect from an
    HP LaserJet product. Make superior laser-quality copies. With the
    software, you can make up to 99 copies of a 50-page original. You can also enlarge,
    reduce, adjust contrast, and collate. Scan documents to create
    electronic text or graphics files. On the HP 3330, send and receive
    documents via standard fax communications.


    This service manual document contain information about: Product
    information, overview of product, front and side view, back and side
    view, hardware description, firmware description. Product specifications, model and servial number, extended warranty, print cartridge
    information. Operation: Operating environment, Identifying the control
    panel components, Control panel menu structure, Control panel error
    messages, Guidelines for using media, Loading media, Selecting originals
    for the ADF, Loading originals to copy or scan. Maintenance: Life
    expectancies of parts that wear, Scanner
    calibration, Cleaning the product, User-replaceable parts, Changing an
    ADF pick roller assembly, Removing and replacing the control panel
    bezel. Operational overview. Formatter system, Central processing unit. Scanner and ADF functions and operation, Printer function and operation, LIU (fax) functions and operation.



    Removal and replacement strategy: required tools, before performing service, print cartridge, parts removal order, separation of scanner from printer, right side cover, scanner side covers. Separation of scanner from printer, scanner assemblies, printer covers, printer assemblies, bottom assemblies. Troubleshooting Guide: Basic troubleshooting, error messages, solving paper feed problems, functional checks, engine test, half test function check, drum rotation functional check, heating element check, high voltage power supply check, paper path check, troubleshooting tools, parts and wiring diagram, index.


    grt here

    Continue Reading[..]

    Reset EPSON Printer, Ink Counter and Ink Cartridges

    "Parts Inside Your Printer Has Reached The End Of Its Service Life" error message shows up on your computer screen.


    Generally, this error message is caused by the malfunction of non
    user-replaceable parts within your printer. NOTE: It is highly
    recommended that if
    your printer is still within its one-year warranty period (from the
    original date of purchase)
    please contact the EPSON from 9 AM to 9 PM
    EST or 6 AM to 6 PM PST Monday through Friday (except holidays) when
    you are with your computer and printer setup. This will save you valuable time and money.

    Else, there are only two things that you can do with this error message:

    Use EPSON Ink Pads Reset Utility or SSC Service Utility for EPSON Stylus Printer

    Epson Ink Pads Reset Utility

    If your product is
    displaying an end of life service message, please view and complete the
    required information from the link below to proceed.

    Please visit ink pad reset page at www.epson.com/ipr for information on the error your printer is displaying and what you can do to fix it.

    SSC Service Utility for Epson Stylus Printer

    The SSC Service Utility allows you to do many amazing things with Your EPSON printer :

    1) Work directly with CSIC in EPSON Stylus printers cartridges.
    2) Reset or rewrite any chip using special add on device.
    3) Freeze internal ink counters.
    4) Reset internal ink counters even with empty cartridges.
    5) Separate cleaning of color and black heads for all EPSON ink jet printers, powerful cleaning mode.
    6) Hot swapping of cartridges supported.
    7) Resetting of protection counter (even then it is already full).
    8) More then 100 different EPSON printers supported This program helps people with high printing demands to save money (the program works with both black and color cartridges).

    The software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.

    Click here to download tools


    Continue Reading[..]

    error 21000068 resetting your Epson T50 or Epson T60


    Get an error 21000068 when repair or resetting your Epson T50 or Epson T60
    and not see  any solution to prevent the problem. Why not try this
    tips, but reset this method not recommended for beginner user and you
    must understand what you are doing. These tips from Jagdish Rathore (India) and I have been granted permission to publish on this blog. He also has been publishing this reset method on his blog on: http://www.epsonservice.blog.com. If you do not have any knowledge about PCB and electronics, I recommend don’t try this reset methode.



    Here the reset method from Jagdish Rathore:

    1. Turn off printer and open printer.
    2. Open your Epson main PCB board.  You can view an 8 pin CMOS IC. 
      That is Epson waste ink counter IC and found on all Epson Printer.

    3. You can reset your printer without any resetter by following these ways.
    4. Soldering pin no 1,2,3,4 by wire  as show in PICTURE and now turn on printer for ”20 second”

    5. After 20 second turn off printer  and remove soldering wire from pin no. 1,2,3,4 ( back in original condition)
    6. Now turn on your printer
    7. And now your printer will be RESET


    Note: This method is not recommended for beginners so you have to
    understand what you are doing. All problem caused by this tutorials is
    not our responsibility. Use this tutorial as your own risk.
    Continue Reading[..]

    Tuesday, March 5, 2013

    Reset ip2000 / 3000

    Reset ip2000 / 3000

    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not,
    press the Power button once more.
    8. Your printer should respond as normal.
    Continue Reading[..]

    Epson 2200 Reset Procedure

    1. Turn off the printer power and unplug the power cord from the wall. Disconnect the computer interface cable at the back of the printer.
    2. After one minute reattach the power plug to the wall, but don’t reattach the computer cable.
    3. Hold down the ROLL and the PAPER ADVANCE buttons simultaneously.
    4. Turn the printer on. after 2 blinks, all the ink lights come on, then release the buttons being held down.
    5. Press and hold the ROLL button for 10 seconds.
    6. Release the ROLL button and the printer will initialize, which resets the Waste Ink Pad Counter.
    7. Once initialization is complete, turn the printer power off.
    8. Reconnect the interface cable.
    9. Turn the printer on and print a document.
    Continue Reading[..]

    Reset Brother MFC-9440CN Drum Error Message

    When you replace the Drum cartridge with a new one, you need to reset the drum cartridge counter by using the following steps:

    1. Turn the the machine’s power switch back on.
    2. Press Menu > Machine Info. > Reset Menu.
    3. Press the Up or Down Arrow key to choose Drum.
    4. Press OK.
    5. Press 1 to reset the drum unit counter.
    6. Press Stop/Exit.


    For this model there are two different types of toner capacity.



    TN110 Low Capacity (Low Yield)

    TN115 High Capacity (High Yield)

    Continue Reading[..]

    Monday, March 4, 2013

    Reset Epson TX110 / TX111


    Use the software resetter for Epson TX110 printer repair / TX111 (Adjustment program for Printer Epson TX110 / TX111)




    Reset Epson TX110 / TX111




    Continue Reading[..]

    Manual Canon BJC3000

    The Canon BJC3000 is ideal printer for domestic use, because it has small size, easy and has 2 spearate colour cartridges. This Canon BJC 3000 printer user’s manual provides complete explanation regarding the printer functions and features, this manual using several symbols to indicate important information. This BJC3000 printer manual divided into sections as follow: Introduction, Parts and functions of the printer, Connecting and turning on the printer, Printing on Paper and Other media, using BJ cartridges, using the Windows Printer driver, using the macintosh printer driver, printing photograph, routine printer maintenance, BJ cartridge maintenance, Replace the BJ cartridge, replacing the ink tanks, aligning the print head, cleaning the printer, transporting the printer, Troubleshooting guide, Printout is unsatisfactory, colors not clear, ink blurred, white streaks visible, and many more. This printer manual available to download in pdf format consist of 514 pages.



    Download Link:
    get here

    Continue Reading[..]

    resetter Canon IP1700 for Free


    To solve the problem on Canon Printer IP1700 please download software resetter Canon IP1700 for Free




    Free Download Resetter Canon IP1700





    Canon IP1700 Ink waste resetter

    http://www.divshare.com/download/2612818-f02
    Continue Reading[..]

    Epson Stylus Pro 4000 Waste Ink Counter Reset

    1. While Powering up the printer, hold down the the left arrow, down arrow, and Up arrow buttons
    2. You will get a “Self Testing” message.
    3. Use the Up Arrow button to select the “Clear Counters” menu.
    4. Press the right arrow button (the Menu button).
    5. Scroll through with the up/down arrows to select “Maint Tank”
    6. Select with the right arrow and execute with the right arrow
    7. Turn your printer off then turn it back on
    Continue Reading[..]

    Sunday, March 3, 2013

    reset the photoconductor (PC) drum counter

    To reset the photoconductor (PC) drum counter, perform the following steps:
    1. Turn off the power using the switch on the back of the printer.
    2. Open the front door of the printer.
    3. Hold the Continue button down, power on the printer, continue to hold down the Continue button until just the Error LED is on solid, then release the Continue button.
    4. Close the front door. The Continue button, Ready/Data, Toner Low, and Load Paper LEDs should all be lit.
    5. Wait
      for the printer to complete its POST process. This is completed once
      the printer begins emitting a fan noise and the rollers start, then
      stop.
    6. Press the Cancel button four times slowly until the Toner Low LED is lit.
    7. NOTE: This is the option for resetting the drum counter.
    8. Press and hold the Continue button until the LEDs all begin to rapidly cycle up / down in sequence, then release the Continue button.The Toner Low LED is the only one on.
    9. Cycle the power on the printer.
    10. When the printer is ready, press the Continue button once to print a settings page.
    11. Under the heading Cartridge Information, verify the Photoconductor value is 0K (zero-K).
    Continue Reading[..]

    Saturday, March 2, 2013

    HDD Font Download Feature

    To register font data onto the HDD, follow the steps below.
    Create a directory on the HDD to store the fonts and download the font data to the directory.
    Creating a Font Directory on the HDD
    To create the “fonts” directory on the HDD, send the following PJL (Printer Job Language) command to the printer.
    %-12345X
    @PJL FSMKDIR NAME="0:pcl"[]
    @PJL FSMKDIR NAME="0:pclfonts"[]
    %-12345XNote: Anything between “[“ and “]” may be ignored. The end-of-line characters must not be in the order .



    Here, means 0x1b, means 0x0d, and means 0x0a.Therefore, %-12345X in hex code would be:0x1b 0x25 0x2d 0x31 0x32 0x33 0x34 0x35 0x58
    %-12345X is the UEL (Universal Exit Language) and must be at the beginning of any job to be registered onto the HDD. @PJL FSMKDIR NAME="0:pcl" specifies the directory pcl to be created on the HDD’s 0 volume. This causes the 0:pcl directory to be created.
    If the volume is not 0, a parse error will occur and no directory will be created.
    Next, the @PJL FSMKDIR NAME="0:pclfonts" command creates the “fonts” subdirectory under “pcl”. The directory where PCL font data can be stored is fixed to 0:pclfonts.
    PCL only recognizes “fonts”. No other directory is supported.
    @PJL FSDOWNLOAD FORMAT:BINARY NAME = "0:pclfontsmCrj00cp.sft" SIZE=71502
    This section specifies the file name and the file size of the PCL font data to follow.
    qFile format must be binary.
    qFile size must count the number of bytes after the , up to the last UEL but excluding the UEL. Size must be in the range 0 -231 - 1.
    0:pclfontsmCrj00cp.sft is the font file name.
    qAvailable characters are the same as those in DOS file names.
    qFile name can be up to 100 characters long. Path names (including all intermediate directory names and the file name) must be no longer than 255 bytes.
    Font ContentPCL 5e commands
    q)s585W
    ØFont Header Command. 585 indicates the number of Font Header Data bytes that follows this command. Font format follows.
    q*c1E
    ØCharacter Code Command. Character Code = 1
    q(s930w
    ØCharacter Definition Command. 930 indicates the number of bytes in the Character Data Block that follows this command. Character Format follows that command.
    qAfter these, Character Code Command and Character Definition Command are sent for each character.
    Continue Reading[..]

    Troubleshooting sequence for printing issues 2

    Print a Self Test page from the printer by disconnecting the printer’s USB cable from the Computer or from the printer side.
    To isolate whether the issue is with printer’s Hardware or Software let’s print a Test page from the printer by disconnecting the printer’s USB cable from the Computer or from the printer side.
    Now, the results show two scenarios:
    One is Hardware issue(If the self test is not printed from printer).
    Second one is Software issue(If the self test is printed from printer).
    Hardware Scenario:
    If the printer does not print a Self Test page from the printer, it confirms that the printer hardware is not functioning properly.Educate the Customer by stating that I’m sorry to say this. As per the results, I suspect that the printer hardware is not functioning properly. However, let us try some more troubleshooting steps to isolate and fix the issue.
    Step 1: Connect the printer directly to wall out let.
    Step 2: Check the ink level.
    Step 3: Cleaning of cartridge and printer contacts.
    Step 4: Perform a Power cycle steps to remove static electricity from printer.
    Follow the steps to Power cycle the printer :
    1.Unplug the power supply from the wall outlet.
    2.Unplug the power supply from the back of the printer.
    3.Wait at least 20 seconds, and then plug in the supply back into the wall outlet.
    4.Plug in the power supply back into the printer.
    5.Press the power button to turn the printer on.
    After performing all the steps, try printing a Self-Test page from printer.
    Continue Reading[..]